When your COROS GPS shows “Location Not Found” or fails to detect your position, your watch may be unable to connect with satellites or provide accurate tracking information. This can affect activities such as running, cycling, hiking, navigation, and outdoor training.

The problem is usually caused by weak GPS signals, outdated satellite data, incorrect GPS settings, software issues, or environmental interference. This guide explains how to fix COROS GPS location not found problems with step-by-step solutions.

Common COROS GPS Location Problems

You may experience:

• COROS GPS location not found
• GPS unable to detect current position
• GPS stuck searching for location
• Incorrect map position
• GPS tracking not starting
• Distance and route errors
• Navigation showing wrong location
• GPS losing location during activities

Why Is COROS GPS Location Not Found?

Several factors can prevent your COROS watch from finding your location.

Common causes include:

• Using GPS indoors
• Poor satellite visibility
• Outdated GPS assistance data
• Firmware issues
• Incorrect GPS mode
• Battery-saving restrictions
• Outdated COROS app
• Synchronization problems
• Long period without GPS use

Step 1: Move to an Open Outdoor Area

The first step is improving satellite visibility.

Follow these steps:

1. Go outside.
2. Move away from buildings.
3. Avoid tunnels and covered areas.
4. Stand in an open area.
5. Keep your watch facing the sky.

Avoid testing GPS:

• Inside buildings
• Near tall structures
• Under dense trees
• In underground locations

A clear view of the sky helps COROS connect to satellites faster.

Step 2: Wait for GPS Signal Before Starting Activity

Starting an activity before GPS lock can cause location problems.

Try this:

1. Select your workout mode.
2. Wait until GPS connects.
3. Confirm location detection.
4. Start your activity.

Waiting for satellite lock improves location accuracy.

Step 3: Restart Your COROS Watch

A simple restart can fix temporary GPS errors.

To restart:

1. Press and hold the power button.
2. Turn off the COROS watch.
3. Wait a few seconds.
4. Turn it back on.
5. Test GPS again.

Restarting refreshes the watch system and GPS services.

Step 4: Sync COROS Watch With the App

Synchronization helps update important device information.

Steps:

1. Open the COROS app.
2. Turn on Bluetooth.
3. Connect your watch.
4. Complete synchronization.
5. Test location detection.

Regular syncing keeps your device updated.

Step 5: Refresh COROS GPS Satellite Data

GPS assistance data helps your watch locate satellites faster.

To refresh:

1. Open the COROS app.
2. Connect your watch.
3. Complete a full sync.
4. Keep Bluetooth enabled.
5. Allow satellite data to update.

After updating, test GPS outdoors.

Step 6: Update COROS Firmware

Outdated firmware can cause location detection problems.

Firmware updates improve:

• GPS performance
• Satellite connection
• Tracking accuracy
• Navigation reliability

To update:

1. Open the COROS app.
2. Select your watch.
3. Check for firmware updates.
4. Install the latest version.
5. Restart your device.

Step 7: Update the COROS App

An outdated app can affect GPS synchronization.

To update:

1. Open your smartphone app store.
2. Search for COROS.
3. Install the latest version.
4. Reconnect your watch.

Keeping the app updated improves communication.

Step 8: Check COROS GPS Settings

Incorrect GPS settings can prevent accurate location detection.

Check:

• GPS mode
• Activity profile
• Battery-saving options

Recommended settings:

• Use high accuracy GPS mode.
• Enable dual-frequency GPS if available.
• Disable extreme power-saving features.

Step 9: Disable Battery Saving Mode

Battery-saving options may reduce GPS accuracy.

Check your watch settings for:

• Low power mode
• Reduced GPS accuracy
• Battery optimization

For better location tracking:

• Charge your watch.
• Use performance GPS settings.
• Disable unnecessary battery-saving options.

Step 10: Reset COROS Watch Settings

If the location problem continues, reset your device.

Before resetting:

• Sync your workouts.
• Save routes.
• Backup important data.

General reset steps:

1. Open watch settings.
2. Select reset options.
3. Confirm reset.
4. Pair the watch again with the COROS app.

A reset can fix software configuration problems.

Step 11: Check for Hardware Issues

If your COROS GPS still cannot find your location, the problem may be hardware-related.

Possible signs:

• GPS never connects outdoors
• Location remains unavailable after resets
• Watch was dropped or damaged
• GPS stopped suddenly

Professional support may be required in these cases.

Common COROS GPS Location Errors and Solutions

COROS GPS Stuck on Searching for Location

Possible causes:

• Weak satellite signal
• Outdated GPS data
• Software issue

Solutions:

• Move outdoors.
• Sync with the COROS app.
• Refresh GPS data.
• Restart the watch.

COROS GPS Location Incorrect

Possible causes:

• Poor satellite reception
• Incorrect GPS mode
• Environmental interference

Solutions:

• Use open areas.
• Enable accurate GPS mode.
• Wait for GPS lock.

COROS GPS Location Lost During Activity

Possible causes:

• Signal blockage
• Battery-saving settings
• Low satellite visibility

Solutions:

• Avoid covered areas.
• Disable power-saving modes.
• Update firmware.

COROS GPS Location Not Found After Update

Possible causes:

• Firmware changes
• Satellite data needs refreshing
• Temporary software issue

Solutions:

• Restart the watch.
• Sync with COROS app.
• Refresh GPS data.
• Test outdoors.

Tips to Prevent COROS GPS Location Problems

Follow these tips:

• Keep firmware updated.
• Sync your watch regularly.
• Refresh GPS satellite data.
• Start activities outdoors.
• Wait for GPS connection.
• Use accurate GPS settings.
• Keep the COROS app updated.
• Charge your watch before long activities.

When to Contact COROS Support

Contact COROS support if:

• GPS cannot find location after all troubleshooting.
• The watch fails after resets.
• GPS hardware may be damaged.
• Location tracking remains incorrect.

Frequently Asked Questions

Why does my COROS GPS say location not found?

This usually happens because of weak satellite signals, outdated GPS data, software issues, or incorrect settings.

How do I make COROS GPS find my location faster?

Sync your watch, refresh GPS data, update firmware, and wait outdoors before starting an activity.

Can a firmware update fix COROS GPS location problems?

Yes. Firmware updates often improve GPS performance and fix software-related location issues.

Why is my COROS GPS inaccurate?

Environmental conditions, outdated software, incorrect settings, or weak satellite signals can affect accuracy.

Does resetting COROS fix location errors?

A reset can fix software-related problems but may not resolve hardware GPS failures.

Conclusion

If your COROS GPS location is not found, start by checking satellite visibility, restarting your watch, syncing with the COROS app, refreshing GPS data, and updating firmware. Most location problems are caused by software or signal issues and can be resolved through proper troubleshooting.

Keeping your COROS device updated and using GPS in open areas ensures accurate location tracking, reliable navigation, and better performance during all outdoor activities.