After installing a Jiobit GPS update, some users may experience problems such as the tracker not showing location, delayed updates, connection failures, or the device appearing offline. These issues can happen due to incomplete updates, app compatibility problems, network interruptions, or temporary software glitches.

This guide explains how to fix Jiobit GPS not working after an update and restore normal tracking performance.

Why Is Jiobit GPS Not Working After Update?

Common reasons include:

• Firmware update not completed correctly
• Jiobit app compatibility issues
• Device needs a restart
• Weak GPS signal
• Poor cellular connection
• Incorrect app permissions
• Bluetooth connection problems
• Temporary software errors
• Device synchronization failure

Common Jiobit Problems After Update

You may notice:

• Jiobit GPS not showing location
• Tracker stuck offline
• Location updates delayed
• App unable to connect
• GPS signal unavailable
• Device not syncing
• Battery draining faster after update

Solution 1: Restart Jiobit GPS Tracker

A restart can refresh the device after a software update.

Follow these steps:

1. Turn off your Jiobit tracker if supported.
2. Wait for a few seconds.
3. Turn the device back on.
4. Open the Jiobit app.
5. Check the current location.

Restarting allows the updated software to load properly.

Solution 2: Restart Your Smartphone

The Jiobit app may need to reconnect after an update.

Steps:

1. Close the Jiobit app completely.
2. Restart your smartphone.
3. Enable Bluetooth and internet connection.
4. Open the Jiobit app again.
5. Check device status.

This can resolve temporary app communication errors.

Solution 3: Check Jiobit Device Connection

Make sure your tracker is properly connected.

Try:

1. Open the Jiobit app.
2. Select your tracker.
3. Check connection status.
4. Move the tracker closer to your phone.
5. Allow the app to reconnect.

A disconnected tracker may not send updated location information.

Solution 4: Check GPS Signal After Update

Software updates can sometimes require the device to reconnect with GPS services.

Try:

1. Move the Jiobit tracker outdoors.
2. Avoid buildings and enclosed areas.
3. Wait several minutes.
4. Refresh the location in the app.

A clear area helps the tracker acquire GPS signals faster.

Solution 5: Check Internet and Cellular Connection

Jiobit requires network communication to send location updates.

Check:

• Mobile data or Wi-Fi connection
• Cellular coverage
• Device online status
• App connection

Poor connectivity can prevent location updates after an update.

Solution 6: Update the Jiobit App

If the tracker firmware updated but the app is outdated, problems may occur.

Steps:

1. Open the App Store or Google Play Store.
2. Search for Jiobit.
3. Install the latest app update.
4. Restart your phone.
5. Open the app again.

Using the latest app version improves compatibility.

Solution 7: Check App Permissions

Updates may change or reset permissions.

Verify:

• Location access is enabled.
• Background location permission is allowed.
• Bluetooth access is enabled.
• Mobile data access is allowed.

Correct permissions are required for accurate tracking.

Solution 8: Charge Your Jiobit Tracker

Low battery can affect GPS performance after updates.

Try:

1. Connect the tracker to its charger.
2. Charge until the battery level improves.
3. Restart the device.
4. Check location tracking.

Stable power helps the update process complete correctly.

Solution 9: Reconnect Jiobit Device

If the app cannot communicate with the tracker:

1. Open Jiobit app settings.
2. Check connected devices.
3. Remove and reconnect the tracker if required.
4. Follow the setup instructions.
5. Test location tracking.

Reconnecting can fix synchronization issues.

Solution 10: Reset Jiobit GPS After Update

If the problem continues:

1. Restart the tracker.
2. Restart your phone.
3. Reconnect the device through the app.
4. Check location updates again.

A reset can help resolve configuration problems caused by updates.

Solution 11: Wait for Update Synchronization

Sometimes the device needs time after an update to:

• Reconnect to the network
• Sync settings
• Acquire GPS location
• Complete background processes

Keep the tracker powered on and connected while waiting.

Fix Common Jiobit Update Problems

Jiobit GPS Shows Offline After Update

Try:

• Restart the tracker.
• Check cellular coverage.
• Update the app.
• Reconnect the device.

Jiobit Location Not Updating After Firmware Update

Try:

• Move outdoors.
• Check GPS signal.
• Refresh the app.
• Restart the tracker.

Jiobit App Not Detecting Tracker After Update

Try:

• Turn Bluetooth off and on.
• Restart your phone.
• Open the app again.
• Reconnect the device.

Jiobit Battery Draining After Update

Try:

• Restart the device.
• Check for additional updates.
• Charge the tracker fully.
• Monitor battery usage.

Tips to Avoid Jiobit Problems After Updates

Follow these tips:

• Keep the Jiobit app updated.
• Charge the tracker before updates.
• Maintain a stable internet connection.
• Keep Bluetooth enabled during setup.
• Do not interrupt firmware installation.
• Restart the device after major updates.

Frequently Asked Questions

Why is my Jiobit GPS not working after an update?

The issue may be caused by incomplete synchronization, app compatibility problems, weak GPS signals, network issues, or incorrect permissions.

How do I restart Jiobit after an update?

Power cycle the tracker if supported, restart your phone, reopen the Jiobit app, and check the device connection.

Does Jiobit need time after an update?

Yes. The tracker may need several minutes to reconnect with GPS, cellular networks, and the mobile app.

Can I reinstall Jiobit software manually?

Jiobit updates are generally handled through the app and automatic firmware update system rather than manual software installation.

How do I fix Jiobit location problems after updating?

Check GPS signal, restart the tracker, update the app, verify permissions, and reconnect the device.

Conclusion

If your Jiobit GPS is not working after an update, start by restarting the tracker and smartphone, checking GPS and network connections, updating the app, and verifying permissions. Most post-update issues are caused by temporary synchronization problems and can be resolved with basic troubleshooting.

Keeping your Jiobit app and device software updated ensures better tracking accuracy, reliable connections, and improved GPS performance.