Resetting your Septentrio GPS/GNSS receiver can help resolve configuration errors, communication problems, incorrect settings, and navigation issues. A reset restores receiver parameters to default values and allows you to reconfigure the device for proper operation.

Septentrio receivers are professional GNSS devices used for surveying, mapping, robotics, autonomous systems, and high-precision positioning. Reset procedures are usually performed through Septentrio RxTools, receiver commands, or the web interface depending on the model.

This guide explains how to reset Septentrio GPS step by step.

Why Reset Septentrio GPS?

A reset may help fix:

• Septentrio GPS not working
• No position fix
• GPS not detecting satellites
• Incorrect configuration settings
• Communication errors
• Navigation problems
• Failed update issues
• Lost GNSS settings

Before Resetting Septentrio GPS

Before performing a reset:

Backup Your Configuration

A reset may remove customized settings.

Save:

• GNSS configuration
• Communication settings
• RTK/NTRIP settings
• Data logging options
• Output message settings

Confirm Receiver Information

Check:

• Septentrio receiver model
• Current firmware version
• Connection method

This helps restore the correct settings after reset.

Method 1: Reset Septentrio GPS Using RxControl

RxControl is part of the Septentrio RxTools software package used for receiver management.

Steps:

1. Connect your Septentrio receiver to a computer.
2. Open RxControl.
3. Select the correct connection method.
4. Connect to the receiver.
5. Open receiver configuration settings.
6. Choose the reset or restore default configuration option.
7. Confirm the reset.
8. Restart the receiver.

After restarting, the receiver will return to default configuration settings.

Method 2: Reset Septentrio GPS Through Web Interface

Some Septentrio receivers provide a built-in web interface.

Steps:

1. Connect the receiver to your network.
2. Open the receiver IP address in a browser.
3. Log in to the receiver interface.
4. Open configuration or maintenance settings.
5. Select reset or restore default settings.
6. Confirm the operation.
7. Restart the receiver.

Method 3: Reset Septentrio GPS Using Receiver Commands

Advanced users can reset the receiver using supported Septentrio commands.

Steps:

1. Connect using a terminal or receiver control software.
2. Access the command interface.
3. Enter the appropriate reset command.
4. Confirm the operation.
5. Restart the receiver.

Only use supported commands for your specific Septentrio model.

Method 4: Power Cycle Reset

A basic restart can solve temporary issues.

Steps:

1. Turn off the receiver.
2. Disconnect power.
3. Wait 30–60 seconds.
4. Reconnect power.
5. Allow the receiver to restart.
6. Check GPS performance.

This does not erase saved configurations.

What Happens After Resetting Septentrio GPS?

After a reset:

• Custom settings may be removed.
• Communication settings may return to default.
• RTK correction settings may need to be re-entered.
• GNSS options may need configuration.
• Receiver will need satellite acquisition time.

How to Configure Septentrio GPS After Reset

After resetting:

1. Connect using RxControl.
2. Set communication parameters.
3. Enable required GNSS constellations.
4. Configure correction services.
5. Set output messages.
6. Save the configuration.
7. Test positioning.

Common Septentrio Reset Problems

Septentrio GPS Still Not Working After Reset

Possible causes:

• Antenna failure
• Hardware issue
• Incorrect firmware
• Power problem

Solutions:

• Check antenna connection.
• Verify firmware version.
• Test power supply.
• Contact technical support if needed.

Septentrio GPS Lost RTK Settings After Reset

Possible causes:

• Default settings restored
• Configuration backup not available

Solutions:

• Re-enter NTRIP settings.
• Restore saved configuration.
• Verify correction source.

Septentrio GPS Cannot Connect After Reset

Possible causes:

• Communication settings changed
• Incorrect connection method

Solutions:

• Check USB/serial/Ethernet connection.
• Verify IP settings.
• Reconfigure communication ports.

Tips Before Resetting Septentrio GPS

Follow these recommendations:

• Backup settings first.
• Confirm receiver model.
• Keep firmware information saved.
• Avoid interrupting the reset process.
• Reconfigure the receiver after reset.
• Test satellite reception afterward.

Frequently Asked Questions

How do I factory reset a Septentrio GPS?

A Septentrio receiver can be restored to default settings through receiver management tools such as RxControl or the receiver web interface, depending on the model.

Does resetting Septentrio GPS delete firmware?

No. A configuration reset restores settings but does not normally remove installed firmware.

Will resetting Septentrio GPS fix location problems?

A reset can fix configuration-related location issues, but antenna, signal, or hardware problems require separate troubleshooting.

Do I need to update firmware after resetting Septentrio GPS?

Not always. Firmware updates are separate from configuration resets.

Conclusion

Resetting your Septentrio GPS receiver can help resolve configuration errors, connection problems, and navigation issues. Before resetting, always save your current settings. After the reset, restore required configurations, reconnect correction services, and verify satellite tracking.

A properly reset and configured Septentrio receiver can provide accurate GNSS positioning and reliable navigation performance.