Resetting your Simrad GPS can help resolve many navigation problems, including frozen screens, incorrect settings, GPS signal issues, slow performance, and software-related errors. A reset restores system settings to their default configuration and can help fix problems caused by incorrect adjustments or configuration changes.

Before resetting your Simrad GPS, it is important to understand the different reset options available. Some resets only restart the system, while others restore factory settings and remove saved preferences.

This guide explains how to reset Simrad GPS, different reset methods, preparation steps, and solutions for common reset-related problems.

Why Reset Simrad GPS?

A reset can help fix issues such as:

• Simrad GPS not working
• GPS not detecting location
• Unable to find satellites
• Incorrect navigation settings
• Frozen display
• Slow system response
• Software errors
• Connection problems
• GPS configuration issues

Types of Simrad GPS Reset

Simrad navigation systems may offer different reset options.

1. Soft Reset

A soft reset simply restarts the device.

It helps fix:

• Temporary software glitches
• Frozen screens
• Minor performance problems

A soft reset does not remove saved data.

2. Factory Reset

A factory reset restores the device to original settings.

It may remove:

• User preferences
• Navigation settings
• Saved configurations

Always back up important data before performing a factory reset.

3. Settings Reset

A settings reset restores system preferences without affecting all stored navigation data.

It can fix:

• Incorrect settings
• Display issues
• Configuration problems

Before Resetting Simrad GPS

Follow these preparation steps.

Backup Your Navigation Data

Save important information, including:

• Waypoints
• Routes
• Tracks
• Custom settings

Backing up prevents accidental data loss.

Record Your Current Settings

Note important configurations such as:

• GPS source
• Display preferences
• Network settings
• Navigation options

Check Your Simrad Model

Reset steps may vary depending on your device model, including:

• Simrad NSS series
• Simrad NSO series
• Simrad GO series
• Simrad Cruise series

How to Soft Reset Simrad GPS

A soft reset is the first step when troubleshooting.

Steps:

1. Turn off your Simrad GPS device.
2. Disconnect the power supply if required.
3. Wait for a few minutes.
4. Reconnect power.
5. Turn the device back on.
6. Check GPS operation.

This refreshes the system without deleting your information.

How to Factory Reset Simrad GPS

Follow these steps to restore default settings.

Steps:

1. Turn on your Simrad GPS.
2. Open the Settings menu.
3. Select System options.
4. Choose Restore Defaults or Factory Reset.
5. Confirm the reset.
6. Wait for the process to complete.
7. Restart the device.

After resetting, you may need to configure:

• Language
• Units
• GPS source
• Chart settings
• Display preferences

How to Reset Simrad GPS Settings

If you only want to restore settings:

1. Open the main menu.
2. Select system settings.
3. Choose reset options.
4. Select settings reset.
5. Confirm the action.
6. Restart the device.

This can resolve configuration-related GPS problems.

How to Reset Simrad GPS After Update Problems

If your Simrad GPS stopped working after a software update:

Try:

1. Restart the device.
2. Check GPS settings.
3. Verify antenna connection.
4. Remove and test the microSD card.
5. Perform a settings reset.
6. Reinstall the correct software update if needed.

Fix Simrad GPS Not Working After Reset

If problems continue after resetting:

Check:

GPS Antenna Connection

Make sure:

• Antenna cable is connected properly.
• Connectors are not damaged.
• Antenna has a clear sky view.

GPS Source Settings

Verify:

• Internal GPS receiver
• External antenna
• Network GPS source

Select the correct GPS source.

Software Version

Install the latest compatible Simrad software update to improve system performance.

Fix Simrad GPS Not Finding Satellites After Reset

After a reset, your GPS may require time to reconnect.

Try:

1. Move to an open area.
2. Turn on the device.
3. Open satellite information.
4. Wait for satellite detection.

If satellites are still missing, check the antenna and software.

Fix Simrad GPS Location Problems After Reset

If your GPS does not show location:

Check:

• GPS signal strength
• Antenna connection
• GPS source settings
• Power supply

Allow the device enough time to acquire satellites.

Tips for a Successful Simrad GPS Reset

Follow these recommendations:

• Backup data before factory resetting.
• Keep your device powered during reset.
• Update software after resetting if required.
• Reconfigure settings carefully.
• Test GPS functions after completion.

Frequently Asked Questions

Does resetting Simrad GPS delete saved routes?

A factory reset may remove settings and stored data. Always back up routes and waypoints before resetting.

How do I restart my Simrad GPS?

Turn off the device, disconnect power if needed, wait briefly, and turn it back on.

Why should I reset my Simrad GPS?

Resetting can fix software errors, incorrect settings, GPS problems, and performance issues.

Will a factory reset fix Simrad GPS problems?

A factory reset can fix configuration-related problems but will not repair damaged hardware or antenna issues.

What should I do after resetting Simrad GPS?

Reconfigure settings, restore saved data, check GPS connection, and update software if needed.

Conclusion

Knowing how to reset Simrad GPS can help solve many common navigation issues, including GPS errors, incorrect settings, and system performance problems. Start with a simple restart before performing a factory reset, and always back up important navigation data before restoring default settings.

Proper resets combined with updated software, correct antenna installation, and regular maintenance can help keep your Simrad GPS system working accurately and reliably.